Bigger Sail, Now Need to Get to Work!

I've used a 40' lateen sail for as long as I've sailed this boat and it's fine in many conditions, but really doesn't do the job in light winds. I got a nice, light, red and white, 54' sprits'l from my Uncle Carl a couple years back, one he used on his Salmon Wherry, and I need to not only make a new mast and spars--all of bamboo--but now need to step it forward of the lateen.

I need to make a mast thwart, also known as a mast 'partner,' and a new step. The current partner [which is built into the forward seat] and step will stay in place, which gives me two rig choices.

The sprits'l needs reefing points installed though. I reckon bringing it down to 40' will be will a good choice.

Sprits'ls are a lot more efficient than lateens [how much, I don't know right off] and they allow the boat to point higher, which will be nice. I just hope the new sail doesn't over power my new leeboards!

A Better Leeboard Assembly

I needed better leeboards and bracket....

Having fought with leeboards that were too small for the purpose, I finally broke down and decided to make a new set. The old ones didn’t provide enough lateral resistance to allow me to sail close to the wind, or as close as could be expected by an open, “Canadian” canoe, and they were overpowered by higher winds. To add to the need, the old boards had been beat to death by running into shoals and had finally cracked.

It was time.

As with any project, careful consideration of what one wants, and what one needs, must be taken into account. This one was no different, but it came with its own requirements that others may not consider or recognize. The reader may be well aware of my opinion that two boards are generally better than one (see “An Argument for Twin, Fixed Leeboards ”) because twin boards provide a wider range of control and flexibility under more conditions. Thus, this would be a twin-leeboard project.

Moving away from that, I had the regular expectations of leeboards, and a couple “wants” as well.

-Leeboards significantly contribute to a boat’s lateral resistance, the force that counters the lateral force sails apply to the boat. By balancing resistance against force, the boat will make way, or go in the direction intended by the helmsman (or -woman.) Boards that are too small don’t get the job done, too big and they add unneeded drag.

-The boards must be easily managed. The skipper must be able to raise and lower them with the least amount of hassle, and they must not become a problem when striking an impediment like the odd log or manatee (both of which I’ve struck while at top speed.)

See the rest of this article here.